Guidance for improving and maintaining rescue team proficiency… We all want to succeed, no matter what we are doing. And success is always better than the alternatives…whether a mediocre performance or worse yet, failure. When it comes to rescue, all of a sudden, the difference between success and failure takes on much greater significance.Not only are...
Federal OSHA and other OSHA State Plans do a good job of providing updates on newly recognized hazards in the workplace, as well as reminding us of existing hazards. We need to heed this information as it takes lessons learned the hardest way, and shares it for others that work in the same or similar...
One of OSHA’s Agency Priority Goals is to reduce trenching and excavation hazards. According to the Bureau of Labor Statistics, excavation and trench-related fatalities in 2016 were nearly double the average of the previous five years. OSHA’s goal is to increase awareness of trenching hazards in construction, educate employers and workers on safe cave-in prevention solutions,...
Now that NFPA 1006 Standard for Technical Rescue Personnel Professional Qualifications (2017 edition) has been in place for a while, it’s a good time to revisit the changes that have been made. While we won’t go into every single change from the previous 2013 edition, we will cover some of the more significant ones –...
There continues to be a misconception that a confined space attendant (or “hole watch”) is a menial task to be assigned to the greenest, most inexperienced personnel on the job. That’s a dangerous assumption, and it has been a contributing factor in many confined space fatalities.
By Dennis O’Connell, Roco Director of Training & Chief Instructor
A month after a 33-year-old worker died while working in an unprotected trench, OSHA inspectors found another employee of the same Missouri plumbing contractor working in a similarly unprotected trench at another job site. OSHA determined that, in both cases, the company failed to provide basic safeguards to prevent trench collapse and did not train...
On Oct. 21, 2016, a D&D Construction employee entered a drainage shaft to clean out mud and debris. No personal fall protection was utilized as the worker descended via bucket 10 ft. into the shaft, which was 4.5 ft. in diameter and lined with concrete.
By Dennis O’Connell, Roco Director of Training & Chief Instructor
The following article was written by Russell Warn and published in ISHN magazine (ishn.com), December 2016. Roco comments have been added to the article and are noted in red. Working in confined spaces presents a unique and dangerous challenge in combatting the unseen – oxygen deficiency, poisonous or explosive gases, and other hazardous substances are...
